···
offloadCfg = pCfg.offload;
reverseSyncCfg = pCfg.reverseSync;
primeEnabled = syncCfg.enable || reverseSyncCfg.enable || offloadCfg.enable;
20
-
busIDType = lib.types.strMatching "([[:print:]]+[:@][0-9]{1,3}:[0-9]{1,2}:[0-9])?";
20
+
busIDType = lib.types.strMatching "([[:print:]]+:[0-9]{1,3}(@[0-9]{1,10})?:[0-9]{1,2}:[0-9])?";
ibtSupport = useOpenModules || (nvidia_x11.ibtSupport or false);
settingsFormat = pkgs.formats.keyValue { };
···
prime.nvidiaBusId = lib.mkOption {
123
-
example = "PCI:1:0:0";
123
+
example = "PCI:1@0:0:0";
Bus ID of the NVIDIA GPU. You can find it using lspci; for example if lspci
126
-
shows the NVIDIA GPU at "01:00.0", set this option to "PCI:1:0:0".
126
+
shows the NVIDIA GPU at "0001:02:03.4", set this option to "PCI:2@1:3:4".
128
+
lspci might omit the PCI domain (0001 in above example) if it is zero.
129
+
In which case, use "@0" instead.
131
+
Please be aware that this option takes decimal address while lspci reports
132
+
hexadecimal address. So for device at domain "10000", use "@65536".
prime.intelBusId = lib.mkOption {
133
-
example = "PCI:0:2:0";
139
+
example = "PCI:0@0:2:0";
Bus ID of the Intel GPU. You can find it using lspci; for example if lspci
136
-
shows the Intel GPU at "00:02.0", set this option to "PCI:0:2:0".
142
+
shows the Intel GPU at "0001:02:03.4", set this option to "PCI:2@1:3:4".
144
+
lspci might omit the PCI domain (0001 in above example) if it is zero.
145
+
In which case, use "@0" instead.
147
+
Please be aware that this option takes decimal address while lspci reports
148
+
hexadecimal address. So for device at domain "10000", use "@65536".
prime.amdgpuBusId = lib.mkOption {
143
-
example = "PCI:4:0:0";
155
+
example = "PCI:4@0:0:0";
Bus ID of the AMD APU. You can find it using lspci; for example if lspci
146
-
shows the AMD APU at "04:00.0", set this option to "PCI:4:0:0".
158
+
shows the AMD APU at "0001:02:03.4", set this option to "PCI:2@1:3:4".
160
+
lspci might omit the PCI domain (0001 in above example) if it is zero.
161
+
In which case, use "@0" instead.
163
+
Please be aware that this option takes decimal address while lspci reports
164
+
hexadecimal address. So for device at domain "10000", use "@65536".
pyrox.dev